> Hi All,
>
> We are running a VSMT test here to migrate a Windows 2000 SP4 box to a
> Virtual Machine. The Windows 2000 box is fairly old, but also a fairly
> standard IDE config. The Box We are Migrating to has ADS, VSMT and
> Virtual Server all installed on it with Windows Enterprise Edition and
> Service Pack 1.
>
> The problem occurs during capture of the image. We are able to boot the
> machine using the RIS floppy and we see the machines connect. The ADS
> Machine is able to get the Drive Geometry Successfully as per below:
>
> Job #.........: 8
> Description...: get geometry
> Status........: Succeeded
> Destination...: Tester2005
> Command.......: /bmonitor/bmpart.exe
> Parameters....: \device\harddisk0 -g
> Exit Code.....: 0
> Owner.........: Administrator
> Start.........: 27/04/2005 11:49:20 AM
> End...........: 27/04/2005 11:49:20 AM
>
> Output:
> Disk Geometry for [\Device\Harddisk0] :
>
> Cylinders ............: 1027
>
> Media Type ...........: 12
>
> Tracks Per Cylinder ..: 255
>
> Sectors Per Track ....: 63
>
> Bytes Per Sector .....: 512
>
> Signature ............: 2686792284
>
> Partition Style ......: MBR
>
>
>
> Partition Information for [\Device\Harddisk0\Partition1] :
>
> Hidden Sectors .......: 63
>
> Starting Offset ......: 32256
>
> Partition Length .....: 8439105024 (8048 MB)
>
> Partition Type .......: 7 (PARTITION_IFS)
>
> Partition Bootable ...: TRUE
>
> Recognized Partition .: TRUE
>
> Partition Information has not changed.
>
>
>
>
>
> Errors:
>
>
> But shortly after ADS tries to perform the CaptureImage step we receive
> the following error:
>
> Job #.........: 9
> Description...: Capture image
> Status........: Failed to complete
> Destination...: Tester2005
> Command.......: /imaging/imgbmdeploy.exe
> Parameters....: img_Tester2005_1_1 \device\harddisk0\partition1 "Image
> from device:Tester2005 source hard drive[0] ide[2:0] partition:1 for
> logical drive:C:" -c -client -nonetencrypt
> Exit Code.....: c0000015
> Owner.........: Administrator
> Start.........: 27/04/2005 11:49:20 AM
> End...........: 27/04/2005 11:52:01 AM
>
> Output:
>
>
>
> Errors:
> The network circuit was disconnected.
>
> {Sector Not Found}
>
> The specified sector does not exist.
>
>
> And in the Dos window where we started the Capture Process we receive:
>
> ===>Remote job output:11
>
> <===Remote job output
> Error: Result Code: 8
> Error occured, exiting (8)
>
> Does anyone know what could be happening? I saw other posts about
> people having problems obtaining Disk Geometry information and that
> this was related to unavailable drivers but it doesn't seem to be the
> same as my problem.
>
> Regards,
>
>
> Ben.
>

> Hi Kim,
>
> I turned off Offload TCP Segmentation but couldn't find a setting for
> Large Send Offload , I disabled all other Offload settings on the
> Network adapter too. After a reboot, I have tried several more times
> and it still gives the exact same error message.
>
> The specified sector does not exist
>
> and
>
> The network circuit was disconnected.
>
> Regards,
>
> Ben.
>

> Hi Kim,
>
> We were using an SMC network adapter with the RIS floppy, now I have
> purchased a 3com 3c905 and booted from the PXE on this adapter and we
> still receive the same error.
>
> Regards,
>
> Ben.
>