ASP Developer Network - Brought to you by Steve Radich and BitShop, Inc. - http://www.bitshop.com

ASPDeveloper

ASPDeveloper.Net / VirtualServerFAQ.COM

Make sure you go to our home page for:

* Virtual Server 2005 FAQ
* ASP.Net 2.0 Information
* ASP.Net 2.0 Streaming Tutorials
* ASP.Net 2.0 HTML based Tutorials

Made possible by Business Internet Technology Shop (BitShop)

Virtual PC

Recent Virtual PC posts

* Shared Folders
* I can"t play wav file with WMP on vista
* Imported disks don"t boot
* multibyte nops
* Differencing disk configuration handling?
* Mini newsgroup FAQ for the week of 9/7/2008
* Portability of guests based on differencing disks??
* Boot screen contents not showing up...
* Vista vs XP memory capacity
* Moved VHD to laptop, annoying problem (IP conflict detected)
* Program too big to fit in memory
* Guest reboots when Host reboots?
* Joining a domain from a VirtPC ?
* Network: Access guest from host
* Can u instal same copy of XP as a VPC?
* Problem reading the registry
* How to Get Started?
* ANOTHER question about OS licensing
* How do I control the way that full screen mode works (stretch to fit, or center)
* Can VPC see Parallel Port/Security Dongle?

Add Solution

Can"t connect to internet

Source: microsoft.public.virtualpc
Sent: 09/10/2008
From: "Gilgamesh" <(email address - cut out)>
Message:

I have Virtual PC 2007 running on W2K3 with SP2. VPC is an XP. The host
connects to internet througha wireless card. I'm using static IP. I have
installed "Virtual Machine Netwrok Service" on the wireless adaptor but the
problem is that VPC can't have a different IP address becuase it would
require autehtication to the router. So, to make the story short, how do I
get VPC to connect to internet?

Thanks,
Gilgamesh

Post Reply | This is Spam! | Mark as Spam

Related Messages

Re: Can"t connect to internet

Sent: 09/10/2008
From: "Gilgamesh" <(email address - cut out)>
Message:

Yes, I have tried NAT as well. That didn't work either.
-G

"David Sanders" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

> Gilgamesh wrote:
>> I have Virtual PC 2007 running on W2K3 with SP2. VPC is an XP. The host
>> connects to internet througha wireless card. I'm using static IP. I have
>> installed "Virtual Machine Netwrok Service" on the wireless adaptor but
>> the problem is that VPC can't have a different IP address becuase it
>> would require autehtication to the router. So, to make the story short,
>> how do I get VPC to connect to internet?
>>
>>
>> Thanks,
>> Gilgamesh
> Have you tried "Shared Networking"?
>

Re: Can"t connect to internet

Sent: 09/10/2008
From: David Sanders <(email address - cut out)>
Message:

Gilgamesh wrote:
Have you tried "Shared Networking"?

Show quoted text

> I have Virtual PC 2007 running on W2K3 with SP2. VPC is an XP. The host
> connects to internet througha wireless card. I'm using static IP. I have
> installed "Virtual Machine Netwrok Service" on the wireless adaptor but the
> problem is that VPC can't have a different IP address becuase it would
> require autehtication to the router. So, to make the story short, how do I
> get VPC to connect to internet?
>
>
> Thanks,
> Gilgamesh
>
>

Re: Can"t connect to internet

Sent: 09/11/2008
From: "Bill Grant" <not.available@online>
Message:

"Gilgamesh" <(email address - cut out)> wrote in message
news:ek#(email address - cut out)...
The other option is to use ICS (Internet Connection Sharing) on the
host. This was designed to allow a second computer to share a Internet
connection. You install a Microsoft Loopback Adapter in the host (from the
add hardware option in control panel) then enable ICS on the host. You
configure ICS to use the NIC as the public interface and the loopback
adapter as the private interface. You link the NIC in the guest to the
loopback adapter network.

When you boot the guest it will get its network config from ICS and be
able to share the host's connection.

Show quoted text

> Yes, I have tried NAT as well. That didn't work either.
> -G
>
>
> "David Sanders" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
>> Gilgamesh wrote:
>>> I have Virtual PC 2007 running on W2K3 with SP2. VPC is an XP. The host
>>> connects to internet througha wireless card. I'm using static IP. I
>>> have installed "Virtual Machine Netwrok Service" on the wireless adaptor
>>> but the problem is that VPC can't have a different IP address becuase it
>>> would require autehtication to the router. So, to make the story short,
>>> how do I get VPC to connect to internet?
>>>
>>>
>>> Thanks,
>>> Gilgamesh
>> Have you tried "Shared Networking"?
>>
>
>

Re: Can"t connect to internet

Sent: 09/11/2008
From: "Gilgamesh" <(email address - cut out)>
Message:

It worked, thanks for your help.
-G

"Bill Grant" <not.available@online> wrote in message
news:(email address - cut out)...

Show quoted text

>
>
> "Gilgamesh" <(email address - cut out)> wrote in message
> news:ek#(email address - cut out)...
>> Yes, I have tried NAT as well. That didn't work either.
>> -G
>>
>>
>> "David Sanders" <(email address - cut out)> wrote in message
>> news:(email address - cut out)...
>>> Gilgamesh wrote:
>>>> I have Virtual PC 2007 running on W2K3 with SP2. VPC is an XP. The host
>>>> connects to internet througha wireless card. I'm using static IP. I
>>>> have installed "Virtual Machine Netwrok Service" on the wireless
>>>> adaptor but the problem is that VPC can't have a different IP address
>>>> becuase it would require autehtication to the router. So, to make the
>>>> story short, how do I get VPC to connect to internet?
>>>>
>>>>
>>>> Thanks,
>>>> Gilgamesh
>>> Have you tried "Shared Networking"?
>>>
>>
>>
> The other option is to use ICS (Internet Connection Sharing) on the
> host. This was designed to allow a second computer to share a Internet
> connection. You install a Microsoft Loopback Adapter in the host (from the
> add hardware option in control panel) then enable ICS on the host. You
> configure ICS to use the NIC as the public interface and the loopback
> adapter as the private interface. You link the NIC in the guest to the
> loopback adapter network.
>
> When you boot the guest it will get its network config from ICS and be
> able to share the host's connection.

Post Reply | This is Spam! | Mark as Spam

Other groups

Virtual PC (Mac)(3592)	Virtual PC(12844)	Virtual PC (French)(496)
Virtual Server 2005(6245)

Our Sponsors

Virtual Server 2005 Info Here!
http://www.aspdeveloper.net

Wiki

Blogs

Articles

Image galleries

File galleries

Forums

Maps

Directories

ASP Developer Network (since 1996) - Brought to you by Steve Radich and BitShop, Inc. - http://www.bitshop.com
Copyright © 1997-2005 by BitShop, Inc. All Rights Reserved.
No content may be reproduced in any form without written permission from BitShop, Inc.
We will be honored to assist with reproduction rights on our material if you contact us.
We also can provide print articles for your magazine, private training seminars at your site, and conference presentations.
Thank you for visiting. Please bookmark our site if you found it useful!
If you wish to make a donation it will help further the development of these free resources: